| PART |
Description |
Maker |
| HCPL0302 HCPL-0302 |
(HCPL3020 / HCPL0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler
(HCPL-3020 / HCPL-0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Avago
|
| HCPL-314J-000E |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPLT250 |
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent Technologies
|
| HCNW3120 HCPL3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent(Hewlett-Packard)
|
| ACNW3130 ACPLJ313 |
Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
AVAGO TECHNOLOGIES LIMI...
|
| ACPL-W314-500E |
ACPL-P314 and ACPL-W314 0.6 Amp Output Current IGBT Gate Driver Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| LTC2751 LTC2751CUHF-12TRPBF |
Current Output 12-/14-/16-Bit SoftSpanTM DACs with Parallel I/O
Current Output 12-Bit SoftSpan DACs with Parallel I/O; Package: QFN; No of Pins: 38; Temperature Range: 0°C to 70°C
|
Linear Technology
LINEAR TECHNOLOGY CORP
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| FOD8316 FOD8316R2 FOD8316R2V FOD8316V |
2.5A Output Current, IGBT Drive Optocoupler
|
Fairchild Semiconductor
|
| HCPL-3160 |
2.0 Amp IGBT Gate Drive Optocoupler with Integrated Over-current Protection and Fault Feedback
|
Agilent (Hewlett-Packard)
HP[Agilent(Hewlett-Packard)]
|
| PS9552L3-AX PS9552L2-E3-AX PS9552L3-E3-AX PS9552L2 |
1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER
2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER
|
NEC
|
| LT3485EDD-2TRPBF LT3485-0-15 |
Photoflash Capacitor Chargers with Output Voltage Monitor and Integrated IGBT Drive; Package: DFN; No of Pins: 10; Temperature Range: -40°C to 125°C SPECIALTY ANALOG CIRCUIT, PDSO10
|
Linear Technology, Corp.
|
